Totally Enclosed Ground Flare The Callidus TEGF flare system consists of a refractory lined cylindrical flare structure designed to have combustion take place within the cylinder. This type of enclosed flare system was originally designed to eliminate the light and noise from the flaring of waste gases. This flare has been used extensively in the combustion of waste gases from chemical plants, hydrocarbon loading terminals, FPSO floating production vessels, refineries, and any other application where low emission, efficient combustion is required on a daily basis. Units can be designed for unlimited air control or for specific air and temperature control to combust very clean gases at minimum required temperatures. The refractory lining is designed to protect the carbon steel support shell of the unit. The flare system has burners that fire at the bottom of the cylinder where premix pilots fire continuously to ensure ignition of the waste gases. Key Features: • Easy on-line maintenance • Sole source systems including installation • Skids 100% pre-wired, pre-piped, assembled and tested • Flame finder technology • Smokeless combustion • Very low noise levels • No radiation outside the combustor • Reduced emission